LA-MAN EXTRACTOR / DRYER รุ่น M-107A

LA-MAN EXTRACTOR / DRYER รุ่น M-107A

รายละเอียด:

LA-MAN EXTRACTOR / DRYER

DESCRIPTION

Model : M-107A
Removes 100% liquid moisture
Removes Water Dirt & Compressor oil
Max pressure : 140 psi
Port size : 1/2"
Air flowrate : 750 l/min ( 1000 l/min max )
Size (cm) : 25 x 10.5 x 0.6
Weight (kg) : 1.1
Replacement Kit for 1st stage element : Model 401
Replacement Kit for 2nd stage element : Model 401
Internal auto drain kit : Model 10513A


- Models range from 15 SCFM thru 2,000 SCFM
- Standard 5 micron ratings (lower micron rating available)
- Removes 99.9% of the liquids entering the Extractor/Dryer
- Easy to install and maintain without removal
- Lightweight aluminum housing
- Immediate cost savings from decreased downtime
- Standard inlet and outlet NPT sizes
- Improve equipment performance and product quality
- Standard Differential Pressure Gauge for rust and dirt particles
- Additional options available : float drain, regulator, lockout valve and electronic drain


How it Works:

Compressed air containing tiny particles of dirt, dust, oil and moisture enters the first stage of theExtractor/Dryer. A coalescing effect occurs as air passes through a cartridge mesh filter that captures particles and causes moisture to form larger droplets. Air velocity lessens as it enters the extraction chamber allowing particles to collect and moisture to condense on the honeycomb. Particle laden water flows along the bottom and out the drain. Air passes through the second stage wire supported fiber filter cartridge that captures remaining particles down to 5 micron. Remaining moisture and contaminates are dried and filtered in the second stage filter. Exhaust air is clean and dry - no dirt, rust, oil or water droplets to disrupt air equipment operation.


Laman Extractor / Dryer ใช้สำหรับดักน้ำ, สิ่งสกปรกขนาดใหญ่กว่า 5 ไมครอน ได้ 100% และน้ำมันได้ 95% ลมที่ออกจากตัวกรองแห้ง, สะอาด